Page tree
Skip to end of metadata
Go to start of metadata


DICOM Server: Sends incoming service requests to registered DICOM services. When configuring, select the TCP listening port, the security protocol for communication, timeouts, and the maximum number of connected DICOM clients (SCUs).




Port that listens for TCP communication.
Default Value: 11112


Local interface IP address to listen for TCP communication. indicates all active interfaces.
Default Value:


Enable Transport Security Layer (TLS) mode:

  • dicom
  • dicom-tls - accept TLS connections; offer AES or DES encryption
  • dicom-tls.aes - accept TLS connections; force AES or DES encryption
  • dicom-tls.3des - accept TLS connections; force DES encryption
  • dicom-tls.nodes - accept TLS connections without encryption

Default Value: dicom


DIMSE message timeout in milliseconds. 0 = no timeout.

Default Value: 1200000


Sets the DICOM A-Associate request timeout in milliseconds. 0 = no timeout. Normally, this setting never needs to be changed.

Default Value: 5000


Socket close delay in milliseconds after a Dicom A-Release response.

Default Value: 50


Maximum Protocol Data Unit (PDU) package length for receiving PDUs. This is a global value that applies to all AE titles. If you have performance issues, set the value higher to make the transfers faster. For example, some modalities prefer a larger PDU size, such as 64K instead of the default 16K.

Default Value: 16352


Pack command and data PDVs in one PDU. This command can be important for query/retrieve communication. Enabling the PackPDVs value will cut the number of packets down from two to one.

Default Value: false


Send packets as quickly as possible (Disable Nagle's algorithmn). This should increase performance on a Windows operating system.

Default Value: true


Buffer size used for socket output. 0 = use platform default.

Default Value: 0


Buffer size used for socket input. 0 = use platform default.

Default Value: 0


Maximum number of incoming DICOM clients that can simultaneously connect. If the number is too small, you receive an association blocked event.

Default Value: 128


Current number of incoming DICOM clients that are connected.


Maximum number of idle threads.

Default Value: 5


Current number of idle threads.


Used internally. Do NOT modify.


Used internally. Do NOT modify.

Default Value: dcm4chee.archive:service=TLSConfig


The class name of the MBean


The status of the MBean


The status of the MBean in text form



Standard MBean lifecycle method


The start lifecycle operation


The stop lifecycle operation


The destroy lifecycle operation

#jbossInternalLifecycle {anchor:jbossInternalLifecycle]

The detyped lifecycle operation (for internal use only)


Get DICOM Handler

notifyCallingAETchange(calledAETs, newCallingAETs)

Send CallingAET changed notification


  • No labels