Description

DICOM Server: Sends incoming service requests to registered DICOM services. When configuring, select the TCP listening port, the security protocol for communication, timeouts, and the maximum number of connected DICOM clients (SCUs).

Dependencies

Attributes

#TCPPort

Port that listens for TCP communication.
Default Value: 11112

#LocalAddress

Local interface IP address to listen for TCP communication. 0.0.0.0 indicates all active interfaces.
Default Value: 0.0.0.0

#SecurityProtocol

Enable Transport Security Layer (TLS) mode:

• dicom
• dicom-tls - accept TLS connections; offer AES or DES encryption
• dicom-tls.aes - accept TLS connections; force AES or DES encryption
• dicom-tls.3des - accept TLS connections; force DES encryption
• dicom-tls.nodes - accept TLS connections without encryption

Default Value: dicom

#DIMSETimeout

DIMSE message timeout in milliseconds. 0 = no timeout.

Default Value: 1200000

#RequestTimeout

Sets the DICOM A-Associate request timeout in milliseconds. 0 = no timeout. Normally, this setting never needs to be changed.

Default Value: 5000

#SocketCloseDelay

Socket close delay in milliseconds after a Dicom A-Release response.

Default Value: 50

#MaximumPDULength

Maximum Protocol Data Unit (PDU) package length for receiving PDUs. This is a global value that applies to all AE titles. If you have performance issues, set the value higher to make the transfers faster. For example, some modalities prefer a larger PDU size, such as 64K instead of the default 16K.

Default Value: 16352

#PackPDVs

Pack command and data PDVs in one PDU. This command can be important for query/retrieve communication. Enabling the PackPDVs value will cut the number of packets down from two to one.

Default Value: false

#TcpNoDelay

Send packets as quickly as possible (Disable Nagle's algorithmn). This should increase performance on a Windows operating system.

Default Value: true

#SendBufferSize

Buffer size used for socket output. 0 = use platform default.

Default Value: 0

#ReceiveBufferSize

Buffer size used for socket input. 0 = use platform default.

Default Value: 0

#MaximumDICOMClients

Maximum number of incoming DICOM clients that can simultaneously connect. If the number is too small, you receive an association blocked event.

Default Value: 128

#CurrentClients

Current number of incoming DICOM clients that are connected.

#MaximumIdleThreads

Maximum number of idle threads.

Default Value: 5

#CurrentIdleThreads

Current number of idle threads.

#DicomSecurityServiceName

Used internally. Do NOT modify.

#TLSConfigName

Used internally. Do NOT modify.

Default Value: dcm4chee.archive:service=TLSConfig

#Name

The class name of the MBean

#State

The status of the MBean

#StateString

The status of the MBean in text form

Operations

#create

Standard MBean lifecycle method

#start

The start lifecycle operation

#stop

The stop lifecycle operation

#destroy

The destroy lifecycle operation

#jbossInternalLifecycle {anchor:jbossInternalLifecycle]

The detyped lifecycle operation (for internal use only)

#dcmHandler

Get DICOM Handler

notifyCallingAETchange(calledAETs, newCallingAETs)

Send CallingAET changed notification

Notifications